Sunday, 10 February 2013

Raspberry Pi and Leds strip RGB

Description
This project came up with my friend who wanted cover his room with leds strip and control all of them with a simple http request.
The idea was to be able to change color and the brightness, so I had to buy just a few components to make the controller:


  • 4x MOSFET N-Channel STP75NF75
  • 1x Breakout Adafruit
  • 1x 16 Channels servo Adafruit
  • 1x PCB
  • some wires

Schema
I just placed all my components on a PCB board, connected the 16 channels servo via I2C and each MOSFET to the leds strip.




Why MOSFET and 16 Channels?
Someone is maybe asking why I am doing this total mess with MOSFET.
The answer is that the 16 Channels couldn't give me the same result that I was expected. This means I couldn't pass the max power through this board, so I avoided the problem by using  4 MOSFET that are getting the main source power, 12V, and Raspberry is sending the right pulse to each ones.

HTTP Request
My friend made a little script in Python that is waiting for a POST request with Red, Green, Blu, Power as parameters and then it will send the new color through the 16 Channels.

Code?!
I don't really have so much code, I took the example from Adafruit to drive the 16 channels ( 3 lines ) and then parsed the 4 parameters to send the value between 0 and 4095.
Obviously I can post something if someones needs a little guide how to parse these values =).


Video


2 comments:

dyov said...

I was Curios if you had your code posted on github or if you could share it here? I am looking at putting a system like this in my car and could use some help. I've never worked with a pi before and should be getting on within the week.

Thank you for any help you can provide.

Christian Bianchini said...

I just used a simple pwm values from 255 to 0, I dont have the code because was a friend's project and I forgot to save it :)